5 Key Takeaways on the Road to Dominating Services

How to Maintain Your Own Swimming Pool

Keeping your swimming pool clean at all times is not a very difficult task. Pools are different from each other and so are their preservation needs. If you want to have a swimming pool that is healthy and clean, then it is very important that you do regular care to it. If you want to prevent issues such as murky water or busted pumps, make sure that you get yourself a pool maintenance guide before repairing or using equipment. Doing regular pool maintenance will free you from anything that will cause annoyance and emergency trips to the store for supplies. Even if you decide to hire a professional for cleaning your pool, there are still some important things that you need to do to ensure that your pool is in good condition all the time.

Check out the guidelines below when you are doing pool maintenance.

During the summer, it is beneficial if you observe your pool chemistry at least twice a week and during the winter at least once a week. There is no need to test the water if you winterize your pool during the winter months. It is still possible for algae and bacteria to grow even if it is very cold outside. Your pool should be shocked every 6 weeks or so during months.

Make sure you check the water level once every month and adjust as required. It should be at the middle of the skimmer if you are checking the water level. If your water level is too high, it can create poor water circulation and movement and this makes it more challenging.

There should be regular scrubbing of walls and tiles. If you want to eliminate algae, then you need to scrub your walls regularly. Keeping your tiles clean will help save you money. Algae likes to stick to walls and steps. Always clean your walls and steps of algae.

It is important to replace all broken or misplaced drains and suction supplies. This is an important part of swimming pool maintenance. Air is sucked into the system if there is a suction side leak at the pump. If you need to gauge this, you should run the equipment and look at the water coming out of your return lines. If there are a lot of air bubbles, there may be excessive air getting into the system Your pump can dry dry and freeze if too much air gets into the system. There is a need of replacement which can be very expensive.

The pH level should not go above 8.0. The pH of the pool should always be checked so that the maximum potential of the chlorine in the pool can be used. IF the pH of the water goes below 7.2, then the chlorin will reduce its effectiveness. Even if you add more chlorin, you will not benefit from it in the same way. This is just like throwing away your money.

Looking On The Bright Side of Maintainers

Repairs: 10 Mistakes that Most People Make